SAS-18 FITMENT INSTRUCTIONS
Before starting, make sure the motorcycle is securely tied into a bike hoist or lift. Step 1.Remove seat, fuel tank, left & right-side covers, maxi fuse, rear fender, frame cross over bracket & rear shock. Step 2. Fitting the Wire Harness Route the wiring harness in from the left-hand sideConnect the red wire to the […]
SAS-99 & SAS-00 FITMENT INSTRUCTIONS
Before starting any work ensure the Motorcycle is securely tied into a bike hoist or lift. Step 1.Raise the motorcycle so the that the back wheel is off the bench.Place a second Jack under the back wheel to support the wheel (see photo below).Remove the OE shocks, keeping OE rear shoulder bolts & washers. Step […]
Marks 2020 Softail Deluxe
As seen in Live to Ride Magazine!
SAS Air Suspension 2018-Up Softail – Coming Soon!
Brown Industries partnered up with SAS Air Suspension and are so excited to bring you the SAS 2018-Current Softail Air Shock! This shock is like no other! After 3 years of extremely hard work we have built the worlds only fully internal Patented Air Shock!Yes that is correct no ugly exposed compressor and valve block […]
REISY – Dave’s 2016 Night Rod Special
SAS Air Suspension has combined with Brown Industries!
SAS Air Suspension is proud to be the world’s only Air Ride with an internal Compressor! The SAS Air Suspension has no compressor to mount, no hoses to run, no fittings to fail & is completely plug and play! Absolutely the easiest install. Raise and lower your rear end at the touch of a button. […]
