$275.00
Available!
SAS Air Suspension Handle Bar Switches are included with complete systems but available for purchase separately.
Complete switch kit for the SAS. The SAS switch kit is the best way to actuate your SAS suspension.
Complete switch kit for the SAS with waterproof push buttons. Fits left or right side. Each push button can control either the UP or the DOWN function for your air system.
Full SAS Systems (SAS-00, SAS-99 & SAS-XL) include this switch as part of the package and are available in your choice of finishes.
*Fits 1996-Later Harley-Davidson hand controls.
*Can be used on the left (clutch) or right (brake master cylinder) side.
To Install: Simply remove the factory clamp from the clutch lever assembly (or master cylinder if installing on the right side) with a torx driver. Run wires from handlebar grip switch as desired – either through the handlebars, or with dimpled handlebars run wires along with other hand control wires outside the handlebars. Then replace the factory clamp with handlebar grip switch and install factory torx bolts using serviceable thread locker on the bolts to keep them secure.
NOTE: If you are buying the switch to fit to an earlier model kit or different brand kit you will need to install using either the SAS WIRING HARNESS or wire the switch up using a 4 pin relay
SAS Air Suspension is proud to be the world’s only Air Ride with an Internal Compressor! Raise and lower your rear end at the touch of a button.The SAS Air Suspension has no compressor to mount, no hoses to run, no fittings to fail & is completely plug and play! Absolutely the easiest install.