Description
- Performance 1 ¾ in. to2 in. stepped headers with radius rear section
- Fabricated from 16-gauge double-wall steel
- Direct bolt-on design for easy installation
- 12mm oxygen sensor ports allow fitment of stock sensors
- Fits Sportsters ’14 – ’20, Note: Will not fit the 1200 Custom, Roadster or 1200T Models
- Made in the U.S.A.
- Passenger Peg Relocation kit available through Revzilla
NOTE: Includes 18mm O2 sensor ports and 12mm adapters
Included Items:
-
- (1) Front head pipe with removable baffle
-
- (1) Rear head pipe with removable baffle
-
- (1) front pipe heat shield(installed)
-
- (1) rear pipe heat shield(installed)
-
- (1) Black steel mounting bracket
-
- (5) #24 hose clamps(installed)
-
- (2) 5/16 in – 18 x 3/4 in. hex head bolts
-
- (2) 5/16 in flat washers
-
- (2) 5/16 in. split lock washers
-
- (1) 3/8 in. x 1/8 in. thick spacer
-
- (2) 18mm O2 sensor plugs
-
- (2) 12mm 02 sensor plugs
NOTE:Â Will not fit with passenger footpegs. Pegs must be removed
Note:
There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing.
Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. We recommend purchasing a fuel management tuner.
Specs:
Fits the following models:
Fitment Disclosure
This quick reference fitment information is provided to direct you to our catalog information and the manufacturer’s information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.
General Safety Warning
Failure to follow manufacturer’s recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, Brown Industries Motorsports Pty LTD accepts no liability for loss or damage resulting from errors or omissions. If you believe any of the information provided is erroneous, please email info@brownindustries.com.au.
