Bassani Road Rage Ripper 2:1 – Black. To Fit: Dyna 2006-17

Description

Bassani Xhaust Road Rage Ripper 2:1 in Black for Dyna 2006-17

• One piece 2-into-1 stepped headers with Upswept Megaphone Muffler
• Stepped 1 3/4″ to 1 7/8″ headpipes
• Utilizes an advanced inner collector for maximum performance
• Full coverage heat shields
• Mild Steel 16Ga Construction
• Removable end cap
• Mig Welded
• 18mm O2 Ports with 12mm Adapters and plugs
• Fits Mid-Controls 2006 – 2017 and forward controls 2006-2017
• Made in the U.S.A.
• Included Items:
  (1) Mild Steel megaphone muffler with removable baffle
  (1) Front/Rear head pipe assembly with welded on collector and muffler
  (1) Partial Stainless Steel heatshields
  (1) Band clamp
  (8) Hose clamps
  (2) 12mm O2 fitting plugs
  (2) 18mm O2 fitting plugs
  (1) Mounting bracket extension
  (1) Five speed mounting bracket
  (2) 3/8″ flat washers
  (1) 3/8″-16 serrated flange nut
  (2) 3/8″-16 x 1″ hex head bolts
  (1) 3/8″ lock washers

Note:
There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing.

Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. We recommend purchasing a fuel management tuner.

Specs:

Fits the following models:

Fitment Disclosure

This quick reference fitment information is provided to direct you to our catalog information and the manufacturer’s information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.

General Safety Warning

Failure to follow manufacturer’s recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, Brown Industries Motorsports Pty LTD accepts no liability for loss or damage resulting from errors or omissions. If you believe any of the information provided is erroneous, please email info@brownindustries.com.au.