Bassani Road Rage ll 2:1 for Dyna – Tall Shocks

Description

• Specifically designed to address clearance for Tall Shocks
• Fits ’91 – 2017 Dyna Forward Controls and ‘2006-2017 Dyna Mid Controls. For ’91-2005 Mid Controls please see part#1D42UB
• Features 2-into-1 equal-length 1-3/4″-1-7/8″ stepped headpipes
• Tapered megaphone-style muffler body with 4″ black billet end cap with contrasting machined flutes
• Includes full-coverage heat shields
• Includes removable baffle
• Black billet end cap and contrasting machined flutes

Included Items:

• • (1) Front headpipe heatshield
  • (1) Rear headpipe heatshield
  • (1) Collector pipe heatshield
  • (1) Front/Rear headpipe assembly
  • (1) Short megaphone w/end cap/baffle
  • (1) 5/16-18 x 1-3/4 in. Hexhead bolt
  • (2) 5/16-18 x 3/4 in. Hexhead bolts
  • (2) 3/8-16 x 1-1/4 in. Hexhead bolts
  • (2) 5/16-18 in. Lock washers
  • (4) 3/8 Flat washers
  • (2) 3/8-16 Nylock nuts
  • (2) 18mm x 1-1.5 O2 sensor plugs
  • (1) #27-73 Barrel band clamp
  • (6) #24 Hose clamps
  • (1) #36 Hose clamps
  • • (1) Extension mounting bracket
    (1) Transmission mounting bracket

Note:
There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing.

Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. We recommend purchasing a fuel management tuner.

Black Specs:

Chrome Specs:

Fits the following models: 

Fitment Disclosure

This quick reference fitment information is provided to direct you to our catalog information and the manufacturer’s information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.

General Safety Warning

Failure to follow manufacturer’s recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, Brown Industries Motorsports Pty LTD accepts no liability for loss or damage resulting from errors or omissions. If you believe any of the information provided is erroneous, please email info@brownindustries.com.au.