Bassani Road Rage 2:1 Exhaust System for 2018-Up Softail Street Bob, Low Rider, Slim & Fat Bob

Description

• 2-into-1 equal-length headers
• Stepped 1-3/4″ to 1-7/8″ headpipes
• Utilizes an advanced inner collector for maximum performance
• Mild Steel Construction
• Heat Shields
• Hand Tig Welding
• 18mm O2 Bungs with 12mm adapters
• Megaphone muffler
• Fits 2018-2021 Street Bob(FXBB), Lowrider(FXLR), Lowrider S(FXLRS), Standard(FXST), Slim(FLSL) and Fat Bob(FXFBS)
• Made in the U.S.A.

NOTE: Includes 18mm O2 sensor ports and 12mm adapters

NOTE: Not all products are legal for sale or use on pollution controlled vehicles. Check your local laws and the manufacturers information

Included Items:
(1) Front heat shield
(1) Rear lower heat shield
(1) Collector Heat Shield
(1) Front/Rear head pipe assembly
(1) Megaphone muffler w/baffle & end cap
(1) Barrel band clamp
(7) #24 Hose clamps
(1) #36 Hose clamp
(2) 12mm adapters
(1) Mounting bracket
(2) 3/8″ Flat washers
(1) 3/8-16 Flange nut
(2) 3/8-16 x 1″ Hexhead bolts
(1) 3/8″ Spring lock washer

Note:
There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is the result of tuning characteristics, cam timing, carburetor jetting, overheating, etc., and is not caused by defective manufacturing.

Installation of a new exhaust system may change your motorcycles fuel-air mixture requirements. We recommend purchasing a fuel management tuner.

Black Specs: 

Stainless Specs: 

Fits the following models: 

Fitment Disclosure

This quick reference fitment information is provided to direct you to our catalog information and the manufacturer’s information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.

General Safety Warning

Failure to follow manufacturer’s recommendations and requirements can cause product failure resulting in serious injury or death. While effort has been taken in collecting accurate fitment information, Brown Industries Motorsports Pty LTD accepts no liability for loss or damage resulting from errors or omissions. If you believe any of the information provided is erroneous, please email info@brownindustries.com.au.